field_job_employment_type

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
We are seeking a reliable and detail-oriented Extrusion Operator to join our production team in Wilkes-Barre, PA. The Extrusion Operator will be responsible for setting up, operating, and monitoring extrusion machinery to ensure consistent product quality and efficient production flow.
 
Position: Extrusion Operator
Location: Wilkes-Barre, PA
Pay Rate: $19.50 per hour
Schedule: Rotating 12-hour shifts
Benefits: Medical, Dental, and AD&amp;D
 
Key Responsibilities:
<ul>
<li>Set up and operate extrusion machines according to production specifications</li>
<li>Monitor production lines to ensure quality, consistency, and efficiency</li>
<li>Perform routine adjustments to equipment to maintain proper product dimensions and output</li>
<li>Inspect and test finished products to verify compliance with company and customer standards</li>
<li>Troubleshoot machine issues and communicate needs for maintenance or repairs</li>
<li>Maintain accurate production, quality, and downtime records</li>
<li>Ensure a clean and safe work area by following company safety protocols</li>
<li>Assist in equipment changeovers, material handling, and general production support</li>
</ul>
Qualifications:
<ul>
<li>Previous extrusion or manufacturing machine operation experience preferred</li>
<li>Ability to read and interpret production instructions and measurements</li>
<li>Strong mechanical aptitude and problem-solving skills</li>
<li>Ability to work 12-hour rotating shifts</li>
<li>Ability to stand for long periods and lift up to 50 lbs as needed</li>
</ul>
Benefits:
<ul>
<li>Medical, Dental, and AD&amp;D insurance</li>
<li>Opportunities for overtime and skill development</li>
</ul>

Extrusion Operator

<h3>Job Description</h3>
Job DescriptionDescriptionCPH is a multi-disciplinary Engineering and Architecture firm that ranks in the nation’s Top 500 Design Firms by ENR Magazine. We are seeking an Electrical Design Engineer to join our dynamic MEP team in Orlando or Sanford, FL! The Electrical Engineer designs, develops, analyzes, and implements electrical systems. This role includes electrical power and lighting calculations and design, load evaluations, equipment and distribution system sizing, failure analysis, risk assessment, and system installation. The Electrical Engineer works with project managers and teams to create design documents, including reports, drawings, specifications, cost estimates, and collaborates effectively with internal and external clients. Duties Include
<ul>
<li>Design, develop, and implement integrated electrical systems from scratch.</li>
<li>Perform electrical calculations, including load analysis, breaker sizing, conduit and wire sizing, voltage drop, and fault current.</li>
<li>Conduct hazard analysis and develop effective mitigation strategies.</li>
<li>Ensure designs comply with applicable safety and regulatory standards.</li>
<li>Develop and document system configurations and design methodologies.</li>
<li>Create electrical design drawings, installation procedures, and engineering reports.</li>
<li>Oversee work of Electrical Designers, including drawings such as single-line diagrams, panel schedules, power plans, lighting plans, and installation details. Review design drawings, specifications, and reports for accuracy, completeness, and quality.</li>
<li>Assist in the evaluation of designs to meet operational and cost-effectiveness goals.</li>
<li>Support cross-functional teams, ensuring alignment on project objectives and timelines.</li>
<li>Ensure electrical designs comply with local codes, regulations, and industry standards.</li>
<li>Research and specify commercially available equipment to meet project requirements for electrical systems.</li>
<li>Interact with clients to understand project needs and address design issues or changes.</li>
<li>Help manage project timelines, resources, and budgets to ensure timely delivery.</li>
</ul>
 Requirements
<ul>
<li>Bachelors Degree in Electrical Engineering</li>
<li>EIT Certification or ability to obtain within 1 year</li>
<li>Experience with Revit and AutoCAD</li>
<li>Minimum 1 years of experience with power distribution and lighting system projects, ideally with commercial projects</li>
</ul>
#LI-SK1 Compensation &amp; Benefits
<ul>
<li>Dependent upon experience.</li>
<li>CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company.</li>
<li>Company Paid Life Insurance and Short-Term Disability.</li>
<li>401K, Paid Personal Time Off, Paid Holidays, and Paid Paternal Leave.</li>
</ul>

Electrical Design Engineer

<h3>Job Description</h3>
Job Description
Production Managers at LandCare are crucial members of our operations team. Production Managers lead the frontline crews to ensure quality, efficiency, and safety while creating beautiful landscapes that inspire our clients. This position oversees production planning, cost estimation, materials procurement, and is directly involved with the hiring and training of crew members. 
WHAT WILL YOU BE DOING?
Landscape Quality and Efficiency
<ul>
<li>Partner with Account Manager and clients to perform landscape quality audits to review landscape quality, task execution, identify maintenance needs, and recommend enhancement opportunities </li>
<li>Create detailed job service plans for each client using LandCare’s Aspire software system </li>
<li>Provide production planning, oversight and guidance to supervisors and team members on client jobsites to drive customer satisfaction with timely and effective service </li>
<li>Identify opportunities to improve production methods and provide additional training to team members </li>
<li>Understand and contribute to profitability goals through proper planning of monthly operations, including management of labor and materials costs and review of financial reports and results </li>
</ul>
Promoting Culture, Training, and Safety
<ul>
<li>Oversee hiring and staffing needs of the business to ensure teams are appropriately staffed </li>
<li>Demonstrate ongoing leadership of a safety-oriented culture and hold all team members accountable for following safety procedures </li>
<li>Educate and train crew members on a variety of safety topics </li>
<li>Continuously mentor supervisors to lead teams and develop crew member talent </li>
</ul>
Benefits
Besides the great team environment and the ability to work outside, we also have a strong benefits package for our team members: 
<ul>
<li>Competitive base salary </li>
<li>Team based profit sharing program </li>
<li>401K for all employees with 3.5% company match </li>
<li>Company-provided vehicle </li>
<li>Medical, dental, and vision coverage </li>
<li>Paid Time Off Policy + 9 corporate holidays </li>
<li>Formal training and development program</li>
</ul>
This opportunity has a base range that represents a full-time annual salary starting at $70,000-$85,000+ (commensurate with experience).

Landscape Production Manager

<h3>Job Description</h3>
Job DescriptionSalary: DOE 
OUTSIDE PLANT PLANNER
Michigan Broadband Services is actively seeking an Outside Plant Planner &amp; GIS Specialist at their Carney, MI location. This position will work directly with the installation and construction teams to develop construction plans and drawings for FTTH projects.
This is a full-time hourly based position that is benefit eligible. This position may require some nights and weekends based on the needs of the business. Travel will be a necessary part of this job.
DUTIES &amp; RESPONSIBILITIES
 Plan and prepare preliminary layouts and detailed design drawings from engineering notes, sketches, and/or other drawings
 Create and review splice diagrams using AutoCAD software
 Organize and maintain all revisions of project drawings, plot files, and project-related information in a logical and well-structured manner 
 Create permit drawings, utility schematics and as-built drawings
 Submit encroachment and specialty permits (city, county, state, local municipalities, CSX, NSRR, etc.)
 Drive to the project locations to collect necessary information for design drawings
QUALIFICATIONS
 High school diploma or equivalent
 Must have a valid license and be insurable with companys insurance carrier
 Experience in AutoCAD, ArcGIS, QGIS, and IQGeo software programs
 Knowledge pertaining to wireless technology
 Ability to read heat maps, geography and tower equipment
 Must have a thorough understanding of public right-of-way, private easements, existing utilities such as water, sewer, gas, electricity, communications, and other underground and aerial facilities
 Must have a strong work ethic and be able to multi-task 
 Must be able to perform efficiently under demand and stress
 Knowledge of Microsoft Office and have strong computer skills
 Must have a valid drivers license and be insurable under Company policy
BENEFITS
 Health, dental and life insurance
 401k with employer match
 PTO and holiday pay

OUTSIDE PLANT PLANNER

<h3>Job Description</h3>
Job DescriptionDIRECT HIRE: An amazing opportunity for an experienced PLC Technician to join a dynamic team in the Wilmington, Delaware area.&nbsp; The PLC Technician is responsible for maintaining, troubleshooting, and programming Siemens PLC and drive systems within a pharmaceutical packaging environment. This role supports ongoing production reliability, equipment optimization, and IT-related automation infrastructure across both the local and international manufacturing network. The ideal candidate will have a strong background in Siemens PLC programming, electrical/mechanical troubleshooting, and industrial automation. Salary Range: $95K - $110K Base Schedule: M-F, 8am - 5pm (Must be available for occasional off-shift or weekend support as needed for production) Essential Responsibilities:&nbsp; PLC &amp; Automation Support
<ul>
<li>Program, troubleshoot, and maintain Siemens PLC/HMI systems and associated automation controls</li>
<li>Lead programming efforts for new installations, modifications, and process improvements</li>
<li>Analyze, test, and debug PLC code to ensure reliable, validated production performance</li>
<li>Maintain and document changes to PLC logic, programs, specifications, and electrical schematics</li>
<li>Provide technical assistance on control system errors, alarms, and performance issues</li>
</ul>
Maintenance &amp; Troubleshooting
<ul>
<li>Perform electrical and mechanical troubleshooting on high-speed packaging equipment</li>
<li>Support daily maintenance tasks including installations, repairs, and preventive maintenance</li>
<li>Identify root causes of system faults and recommend/implement solutions for improved uptime</li>
<li>Collaborate with production and engineering teams to drive equipment optimization</li>
</ul>
IT/Systems Support&nbsp;
<ul>
<li>Assist in maintaining production-related IT infrastructure including HMI interfaces, server backups, and equipment communications</li>
<li>Install, configure, and support industrial computers, telephony, and peripheral systems</li>
<li>Ensure compliance with IT standards for pharmaceutical production systems</li>
<li>Provide on-site technical support, training, and collaboration during international visits</li>
</ul>
Documentation &amp; Compliance
<ul>
<li>Create and update SOPs, PM tasks, change controls, and technical documentation for PLC systems</li>
<li>Participate in safety, quality, and compliance audits as required by cGMP and internal procedures</li>
<li>Provide technical training for operations and maintenance personnel on automated systems</li>
</ul>
Project &amp; Continuous Improvement
<ul>
<li>Participate in capital projects and system upgrades related to automation and process control</li>
<li>Identify and recommend automation improvements tied to yield, throughput, and reliability</li>
<li>Support lean manufacturing and Six Sigma initiatives as applicable</li>
</ul>
Global Collaboration &amp; Travel
<ul>
<li>Support shared automation and maintenance responsibilities across company plants in Germany</li>
<li>Coordinate with international teams on standardization, best practices, and equipment optimization</li>
<li>Travel to Germany approximately 15–20% of the time, estimated at 4 trips per year for 1–2 weeks per trip</li>
</ul>
Qualifications/Competencies:
<ul>
<li>Associate’s or Bachelor’s degree in Electrical Engineering Technology, Mechatronics, Automation, or a related field preferred.</li>
<li>Minimum of 3–5 years of experience in industrial PLC programming and troubleshooting (Siemens strongly preferred).</li>
<li>Hands-on experience with Siemens S7, TIA Portal, WinCC, or equivalent HMI software.</li>
<li>Proficiency with industrial control systems including VFDs, sensors, relays, and safety circuits.</li>
<li>Ability to read and interpret electrical schematics, P&amp;IDs, and mechanical diagrams.</li>
<li>Familiarity with cGMP, FDA, or regulated manufacturing environments is a strong plus.</li>
<li>Strong analytical, organizational, and communication skills.</li>
<li>Ability to work independently and prioritize tasks in a fast-paced production setting.</li>
</ul>
Physical Demands: While performing the duties of this job, this team member is occasionally required to stand, walk, sit, use hands to handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop; kneel; crouch or crawl; talk or hear.&nbsp; The employee must occasionally lift and/or move up to 50 pounds.&nbsp; Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: While performing the duties of this job, this team member is working within normal manufacturing conditions at a moderate noise level.&nbsp; On occasion they may need to perform some duties within the hot, dusty, or cramped areas. Additional PPE is required. Once you apply, please text "PLC" to 904-712-6140 for a faster reply.&nbsp; INDH &nbsp;
Powered by JazzHR
EBFlm8VO67

PLC Technician - Relocation Assistance

<h3>Job Description</h3>
Job Description
REPORT TO: QUALITY MANAGER
PURPOSE: 
Responsible for supervising and coordinating activities of quality assurance personnel, assist Quality Manager in all aspects of the Quality Department. 
ESSENTIAL FUNCTIONS:
• Maintain discipline, morale, harmonious personnel relations; handle complaints in accordance with company policy; conduct interviews and employee performance evaluations; make effective recommendations for increases, promotions, transfers, hiring and terminations. 
• Assist in managing and maintaining ISO 9001, 14001, 13485, TS 16949 standards and FDA 21 CFR 820 regulatory compliance.
• Development, implementation, monitoring, assessment, and continuous improvement of applicable quality standards.
• Supervise day to day plant quality control functions, investigate discrepancies, and issue corrective actions against persistent non-conformances.
• Assist in administration of Corrective and Preventive Actions (CAPA).
• Perform compliance and layered process audit of quality system and processes to ensure effectiveness of procedures and instructions.
• Participate in APQP and validation of processes as required. Assist in setting up quality standards for new products.
• Work with appropriate managers and supervisors to ensure timely resolution of outstanding quality concerns.
• Enforce prescribed safety rules and regulations; ensure that work areas are maintained in a neat and orderly condition. 
• Assist in change management and quality control documentation, including part specific instructions and procedures.
ADDITIONAL SKILLS OR CREDENTIALS:
• Associate or Bachelor’s degree in Engineering or Technology. Equivalent combination of education and experience will be considered in lieu of a degree.
• 3+ Years of experience in quality control functions, including but not limited to APQP, PPAP, AIAG core tools (FMEA, Control Plan, etc.).
• Knowledgeable in ISO and Automotive (ISO/TS 16949), ISO 13485, ISO 9001 and ISO 14001 standards.
• Knowledge of FDA 21 CFR 820 would be a plus.
• Excellent verbal and written communication skills.
• Demonstrated hands-on approach to daily challenges.
• Experience in writing procedures, instructions and 8D-5Why reports.
• Experience or knowledge of layered audits would be a plus.
• Experience training other employees (preferred)
Physical Demands:
• While performing the duties of this job, the employee is regularly required to walk, use hands to position or move, reach with hands and arms, talk, and hear.
• The employee frequently is required to stand, sit, climb, balance, stoop, kneel, crouch, or crawl.
• The employee must regularly lift and/or move up to 10 lbs., frequently lift and/ or move up to 25 lbs. and occasionally lift and/or move up to 40 bs.
• Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
• Must be able to lift 40 lbs. 
• Must be able to be on feet for extended periods of time, up to and exceeding 8 hours.

Quality Engineer

<h3>Job Description</h3>
Job Description
Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employees’ hard work and determination and REWARD results all while having fun! 
Our mission is to make life better by connecting people through innovative communication systems.
We are seeking OSP Design Engineers to assist with the design and production of engineering deliverables on complex overhead and underground utility distribution projects. This position may require interfacing with utility clients, customers, and the potential for collaboration with multiple offices.
Responsibilities
<ul>
<li>Assist in the preparation and development of distribution voltage construction packages for both overhead and underground projects, including distribution equipment installation, feeder replacement, cable replacement, and new feeder design.</li>
<li>Design aerial path based on field data and engineering best practices.</li>
<li>Ensure that all designs and new attachments satisfy utility standards and relevant codes (E.G. NESC / GO95 standards).</li>
<li>Review utility poles and field notes to determine most accurate make ready solution.</li>
<li>Research and document requirements on aerial construction by pole owner or customer for whom the work is being performed.</li>
<li>Act as a Subject Matter Expert for Pole Loading Design and Analysis, both internally and externally to CCI’s customers.</li>
<li>Determine Right of Way (ROW) locations.</li>
<li>Determine the correct customer template to be used in the creation of construction and permitting drawings.</li>
<li>Complete ROW permitting and submittal as needed on behalf of the facility owner.</li>
<li>Confirm all deliverable documents are complete at project handoff with minimal direction.</li>
<li>Meet with Project Designers to review project data and the ability to input that data into OCALC or similar software.</li>
<li>Perform other duties and responsibilities as assigned.</li>
<li>Ensure confidentiality of company and customer information.</li>
<li>Create and promote the company image through exercising sound and ethical business practices as related to employees, the public and customers. This includes ensuring that the service and quality provided to customers is satisfactory.</li>
<li>Other duties as assigned by management.</li>
</ul>
Qualifications we are looking for
<ul>
<li>3 years’ relevant electric utility distribution design experience required.</li>
<li>Proficient with pole loading analysis software (e.g., O-Calc Pro, Katapult, PoleForeman, Spidacalc, PLS-Pole) required.</li>
<li>Complete the design of OSP projects, aerial, buried, and underground using AutoCAD, Adobe, GIS, and Excel with minimal direction.</li>
<li>Experience with utility engineering, Communications, Power Distribution, and Gas.</li>
<li>Experience in the Utility industry, permit completion and coordination.</li>
<li>Basic understanding of utility design, engineering concepts, and design tools.</li>
<li>Demonstrated track record of process improvements using new techniques, technology, or concepts. </li>
<li>Strong interpersonal and communication skills, with a demonstrated ability to work well and efficiently with a wide variety of people. </li>
<li>Strong organizational skills that reflect ability to perform and prioritize multiple projects seamlessly with excellent attention to detail and ability to meet strict deadlines.</li>
<li>The ability to work independently with minimal supervision; highly responsible, resourceful, and self-motivated.</li>
<li>Strong analytical, critical thinking, and problem-solving skills.</li>
<li>Able to meet strict deadlines.</li>
<li>Ability to embrace corporate values, understand the company vision, and exemplify CCI leadership behaviors.</li>
</ul>
Shift isfull-time Monday – Friday between the hours of 8:00 am – 4:00 pm CST. Must be flexible, and willing to work outside normal business hours, as necessary.
Additional Information 
<ul>
<li>Occasional travel may be required.</li>
<li>Must have a valid driver’s license and good driving record.</li>
</ul>
CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.

OSP Design Engineer

<h3>Job Description</h3>
Job Description
 
 Cargill Animal Nutrition is a global business that serves large-scale feed mill operators and retailers, as well as individual farmers. Our business has provided better nutrition for better lives for more than 120 years. By leading, innovating, and transforming the animal nutrition &amp; health industry, we ensure that the customers we serve, the animals we feed, and the consumers who rely on that protein, thrive.
 Working at Cargill is an opportunity to thrive a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe. We depend on creative, responsible, hardworking individuals like you to operate our business successfully!
Job Type: Full Time Shifts Available:3rd Compensation: $20.00/hr
 Benefits: 
<ul>
<li>Medical, Dental, Vision, and Prescription Drug Insurance</li>
<li>Health and Wellness Incentives</li>
<li>Paid Vacation and Holidays</li>
<li>401(k) with Cargill matching contributions</li>
<li>Flexible Spending Accounts (FSAs)</li>
<li>Short-Term Disability and Life Insurance</li>
<li>Employee Assistance Program (EAP)</li>
<li>Tuition Reimbursement</li>
<li>Employee Discounts</li>
</ul>
 Principal Accountabilities 
<ul>
<li>Operating equipment and technology tools throughout the facility which will Include operating all of the following: Short Mix Micro Hand Additives, Production Ingredient Mixers, Pellet Mills, Grinders, Packaging Equipment, Truck Weighing Scales, Palletizers</li>
<li>Collecting product samples and supervising tank levels, utilizing computer systems to input and record data as necessary</li>
<li>Running required testing for quality checks on inbound ingredients and outbound products</li>
<li>Utilizing computer systems for operating automation of production operations</li>
<li>Manufacturing products to ensure that they meet specifications</li>
<li>Scheduling, sequencing, and manufacturing products to meet all quality standards before delivering to customers</li>
<li>Interacting regularly with peers and management to pursue continuous improvement of facility operations and promote a teamwork-focused environment</li>
<li>Operating mobile equipment such as forklifts, loaders, etc.</li>
<li>Understanding and adhering to all safety policies and procedures</li>
<li>Maintaining a safe and clean work environment</li>
<li>Other duties as assigned</li>
</ul>
What You Will Need: 
<ul>
<li>Eligible to work in the United States without visa sponsorship</li>
<li>Be 18 years or older</li>
<li>Ability to understand and communicate in English (verbal/written)</li>
<li>Intermediate computer skills</li>
<li>Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE)</li>
<li>Ability to work in elevated areas (4 feet and above)</li>
<li>Ability to perform physical job duties which may include bending, lifting up to 50lbs, kneeling, climbing, crawling, and twisting, with or without reasonable accommodation</li>
<li>Ability to work overtime including holidays, nights, weekends, or different shifts with advance notice </li>
</ul>
What Will Put You Ahead: 
<ul>
<li>High school diploma/GED or a minimum of two years equivalent work experience</li>
<li>Minimum of two years of experience troubleshooting and maintaining various mechanical components and systems</li>
<li>Prior experience in production-related work</li>
<li>Experience with Computerized Maintenance Management Systems (CMMS), such as SAP</li>
</ul>
 Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet 
 
 To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.Company DescriptionCargill is a family company committed to providing food, ingredients, agricultural solutions, and industrial products to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make and deliver products that are vital for living. We provide customers with life’s essentials to enable businesses to grow, communities to prosper and consumers to live well in their daily lives. It’s a long-term view, harnessing over 158 years of experience to do the right thing today, and for generations to come.

Process Technician II

<h3>Job Description</h3>
Who We Are
As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.
The Electrical Engineer position is based out of our Quad Cities Generating Station in Cordova, IL.
 Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.
Total Rewards
Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.
*****************This Engineering role can be filled at Entry-level, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************&nbsp;
Entry Level - $85,000&nbsp;
Mid Level - $90,000-$110,000&nbsp;
Sr Level - $117,000-$143,000&nbsp;
Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K&nbsp;
Primary Purpose of Position
Responsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.
Primary Duties and Accountabilities
<ul>
<li>Perform engineering and technical tasks as assigned by supervision applying general engineering principles</li>
<li>Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.</li>
<li>Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.</li>
<li>Recommend format and methodology improvements to standard processes and procedures.</li>
<li>Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.</li>
</ul>
MINIMUM QUALIFICATIONS for Entry Level E01 Engineer &amp;ndash New Graduate
<ul>
<li>B.S &nbsp;in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear)&nbsp;</li>
<li>Maintain minimum access requirements or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties</li>
</ul>
MINIMUM QUALIFICATIONS for Mid-level E02 Engineer
<ul>
<li>B.S. in Engineering, a minimum 2 years Nuclear experience or related engineering experience</li>
<li>Must meet additional requirements as outlined in ANSI/ANS-3.1-2014 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"</li>
<li>Maintain minimum access requirements or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties</li>
</ul>
MINIMUM QUALIFICATIONS for Senior E03 Engineer
<ul>
<li>B.S. in Engineering, a minimum 5 years Nuclear experience or related engineering experience</li>
<li>Must meet additional requirements as outlined in ANSI/ANS-3.1-2014 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"</li>
<li>Maintain minimum access requirements or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties</li>
</ul>
Preferred Qualifications
<ul>
<li>Engineer in Training Certification</li>
<li>Good grasp of techniques and a good understanding of the fundamental functions performed by the group, as responsibility increases within the organization</li>
</ul>

Electrical Engineer

<h3>Job Description</h3>
WHO WE ARE
As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.
TOTAL REWARDS
Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.
***This Engineering role can be filled at the Entry, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***
Expected salary range:
<ul>
<li>Entry Level - $82,500</li>
<li>Mid-Level - $88,000 - $108,000</li>
<li>Sr Level - $115,000- $141,000</li>
</ul>
Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.
MINIMUM QUALIFICATIONS for Entry Level E01 Engineer &amp;ndash New Graduate
<ul>
<li>B.S &nbsp;in Engineering</li>
</ul>
MINIMUM QUALIFICATIONS for Mid-level E02 Engineer
<ul>
<li>B.S. in Engineering, a minimum 2 years Nuclear experience or related engineering experience</li>
</ul>
MINIMUM QUALIFICATIONS for Senior E03 Engineer
<ul>
<li>B.S. in Engineering, a minimum 5 years Nuclear experience or related engineering experience</li>
</ul>
PRIMARY PURPOSE OF POSITION
Performs advanced engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses superior knowledge in functional discipline and its practical application and has excellent knowledge of applicable industry codes and regulations. Functions with recognized industry-level of expertise in a technical area.
PRIMARY DUTIES AND ACCOUNTABILITIES
<ul>
<li>Perform advanced engineering and technical tasks in support of nuclear plant operations.</li>
<li>Perform independent research, reviews, studies and analyses in support of technical projects.</li>
<li>Provides in-depth technical expertise to develop, manage and implement engineering activities related to plant safety, reliability, maintainability, and availability ensuring compliance to customer's needs, regulatory requirements, and corporate policies.</li>
<li>Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices and codes are used in preparation of plans and specifications.</li>
<li>Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.</li>
<li>Provides initial or complete task management of engineering issues.</li>
<li>Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.</li>
<li>Supports plant design modifications, testing and problem solving.</li>
<li>Assure all engineering products prepared or overseen are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.</li>
<li>Develop, implement and coordinate functional supervisory activities including, but not limited to, personnel, budgetary accountabilities and planning goals with respect to engineering personnel.</li>
</ul>
MINIMUM QUALIFICATIONS
<ul>
<li>B. S. degree in engineering or licensed Professional Engineer</li>
<li>Engineering experience and exceptional performance</li>
</ul>
PREFERRED QUALIFICATIONS
Professional Engineering Registration, advanced technical degree or coursework

202,819 Manufacturing Jobs